TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 709 of 968
TM 9-2815-210-34-2-2 FRAME 5 NOTE When checking flywheel face (4) runout, push flywheel forward as far as it will go. Hold forward pressure on flywheel while turning crankshaft pulley (5). Soldier A Soldier B Soldier A Soldier B Soldier A 1. 2. 3. 4. Mount dial indicator (1) on flywheel housing (2) so indicator pointer (3) rests on flywheel face (4) as shown. Set dial in- dicator to zero. Using engine barring tool, turn crankshaft pulley (5) slowly to the right until soldier A tells you to stop. Read dial indicator (1) as soldier B turns crankshaft pulley (5). When dial indicator is at the highest reading, tell soldier B to stop. Set dial indicator to zero. When soldier A is ready, turn crankshaft pulley (5) slowly one full turn to the right. NOTE Dial indicator (1) will now read total flywheel runout. Fly- wheel runout must not be more than 0.008 inch. 5. Read dial indicator (1) as soldier B turns crankshaft pulley (5). END OF TASK 5-80