TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 708 of 968
TM 9-2815-210-34-2-2 FRAME 4 Soldier A Soldier B Soldier A Soldier B Soldier A NOTE When checking flywheel rim (4) runout, push flywheel forward as far as it will go. Hold forward pressure on flywheel while turning crankshaft pulley (5). 1. Mount dial indicator (1) on flywheel housing (2) so indicator pointer (3) rests on flywheel rim (4) as shown. Set dial indi- cator to zero. 2. Using engine barring tool, turn crankshaft pulley (5) slowly to the right until soldier A tells you to stop. 3. Read dial indicator (1) as soldier B turns crankshaft pulley (5). When dial indicator is at the highest reading, tell soldier B to stop. Set dial indicator to zero. 4. When soldier A is ready, turn crankshaft pulley (5) slowly one full turn to the right. NOTE Dial indicator (1) will now read total flywheel runout. Fly- wheel runout must not be more than 0.008 inch. 5. Read dial indicator (1) as soldier B turns crankshaft pulley (5). GO TO FRAME 5 5-79