TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 691 of 968
TM 9-2815-210-34-2-2 FRAME 5 1. 2. 3. 4. 5. 6. NOTE Use cylinder head nut wrench with torque wrench to tighten nuts (1, 8, and 9). Tighten nuts (1 through 14) to 40 pound-feet in order shown. Tighten nuts (1 through 14) to 80 pound-feet in order shown. Tighten nuts (1 through 14) to 110 pound-feet in order shown. Tighten nuts (1 through 14) to 130 pound-feet in order shown. NOTE Do step 5 only if crankcase has “TD” identification. Refer to frame 3. Tighten nuts (1 through 14) to 157 pound-feet in order shown. Do steps 1 through 5 again for other cylinder head. END OF TASK 5-62