TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 68 of 968
TM 9-2815-210-34-2-2 FRAME 31 1. 2. 3. NOTE Four different crankshafts (2) can be used in these en- gines. They differ in the diameters of the main bearing journals and connecting rod journals. The four crank- shafts are: early model standard size, late model stand- ard size, 0.0100-inch undersize, and 0.0200-inch under- size. Look at flywheel mounting face (1) of crankshaft (2). If no number is stamped here, this is a standard size crankshaft. Note this for future use. Look at flywheel mounting face (1) of crankshaft (2). If the number 0.010 or 0.0100 is stamped here, this is a 0.0100-inch undersize crankshaft. Note this for future use. Look at flywheel mounting face (1) of crankshaft (2). If the number 0.020 or 0.0200 is stamped here, this is a 0.0200-inch undersize crankshaft. Note this for future use. IF CRANKSHAFT (2) WAS CHANGED DURING THIS TASK, GO TO FRAME 32. IF CRANKSHAFT (2) WAS NOT CHANGED DURING THIS TASK, GO TO FRAME 34 4-49