TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 671 of 968
TM 9-2815-210-34-2-2 b. Piston Cooling Nozzles Adjustment (Engines LDS-465-1A and LDS-465-2). FRAME 1 1. 2. 3. 4. NOTE Tell machine shop to make adapter with gasket (1). See figure 5-2. Use two oil pressure regulator valve adapter capscrews (2) to hold adapter (1). Put fabricated adapter with gasket (1) in place over nozzle gallery supply hole. Put in two capscrews (2). Put oil supply line (3) on adapter (1). Put other end of oil supply line on outlet side of oil pressure tank (4). Fill oil pressure tank (4) with OE/HDO 10 engine oil. NOTE Air pressure supply must be set to 80 psi. Hook oil pressure tank (4) to air pressure supply. GO TO FRAME 2 5-42