TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 670 of 968
TM 9-2815-210-34-2-2 FRAME 4 1. Coat connecting rod bearing lower half (1) and bearing cap (2) with oil. NOTE Bearing caps (2) are numbered. Bearing cap number must match and face the same way as connecting rod number. 2. Put bearing cap (2) in place on connecting rod (3). Put in two capscrews (4). 3. Tighten capscrews (4) to 66 to 67 pound-feet. 4. Tighten capscrews (4) to 95 to 100 pound-feet. 5. Do step 2 of frame 1 and frames 2 through 4 again for the other five pistons. END OF TASK 5-41