TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 649 of 968
TM 9-2815-210-34-2-2 5-6. CRANKSHAFT GEAR AND CAMSHAFT GEAR. FRAME 1 1. 2. 3. 4. WARNING Use welder's gloves to (1) and camshaft gear burn personnel. handle heated crankshaft gear (2). Hot metal can seriously NOTE Crankshaft and camshaft gears must be put on, and camshaft gear retaining nut put on and tightened as soon as possible after the gears are heated. Use 250° Tempilstick to check temperature of heated parts. Heat crankshaft gear (1) and camshaft gear (2) to 250°F. Aline keyway in crankshaft gear (1) with key on crankshaft (3) and push crankshaft gear in place on crankshaft, making sure crankshaft gear teeth mesh with teeth on oil pump idler gear (4). As camshaft gear (2) is being put on camshaft (5), aline keyway in camshaft gear with key on camshaft. Aline timing marks (6) on camshaft gear (2) with timing mark (7) on crankshaft gear (1). GO TO FRAME 2 5-20