TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 632 of 968
TM 9-2815-210-34-2-2 FRAME 2 WARNING Do not use less than six universal mounting arms. Using less than six arms may cause cylinder block to fall, causing damage to equipment and injury to personnel. NOTE Capscrews used to mount cylinder block accessories will be used to mount cylinder block to maintenance stand. Universal mounting arms will be placed as far apart as practical at various angles. Do not tighten capscrews until all screws are put in. 1. Working on crank side of maintenance stand, put two universal arms (1) in place on mounting plate (2). Put in two cap screws 2. Put two L-shaped brackets (4) in place on cylinder block (5). 3. Put in two capscrews (6). GO TO FRAME 3 and cap- mounting (3). 5-3