TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 59 of 968
TM 9-2815-210-34-2-2 FRAME 23 1. Check that outside diameter measurements for seven main bearing journals (1 through 7) noted in step 3 of frame 20 are within limits given in table 4-5. 2. If any outside diameter measurements for seven main bearing journals (1 through 7) is not within limits given in table 4-5, get a new crankshaft (8). GO TO FRAME 25 Table 4-5. 0.0100-Inch Undersize Crankshaft Main Bearing Journals Wear Limits Index Number 1 through 7 4-40 Item /Point of Measurement Main bearing journals out- side diameter Size and Fit of New Parts (inches) 3.6110 to 3.6120 Wear Limits (inches) 3.6090