TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 544 of 968
TM 9-2815-210-34-2-2 4-57. FUEL INJECTION PUMP DRIVE GEAR ACCESS COVER (ENGINES LD-465-1, LD-465-1C, AND LDT-465-1C). There are no special cleaning procedures needed. Refer to cleaning procedures given in para 4-3. b. Inspection and Repair. FRAME 1 1. 2. 3. Check that other way. Check that other way. new access five nuts (1) are not stripped, crossthreaded or damaged in any If nuts are damaged, get new ones. access cover (2) is not cracked, bent, dented or damaged in any Take out minor bends or dents. If more repair is needed, get a cover. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Check that access cover (2) has no nicks, burrs or surface. Take out minor nicks, burrs or scratches crocus cloth dipped in dry cleaning solvent. END OF TASK scratches on gasket with a fine mill file or 4-525