TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 542 of 968
TM 9-2815-210-34-2-2 FRAME 5 1. Using combination square (1), check clearance A from three release levers (2) to pressure plate face (3). Clearance should be 2-5/32 inches. 2. If clearance is not as given in step 1, take off three locknuts (4). 3. Using 1 1/16-inch socket (5) with breaker bar (6), turn three adjusting screws (7) to get clearance A of 2-5/32 inches. 4. Hold adjustment screws (7). Put on locknuts (4). END OF TASK 4-523