TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 541 of 968
TM 9-2815-210-34-2-2 FRAME 4 1. Put clutch pressure plate (1) on flat surface. 2. Using combination square (2), check for 1-9/32 inch clearance A between pressure plate face (3) and pressure rover flange (4). 3. Using 9/16-inch socket (5) with breaker bar (6), set three retaining screws (7) and washers (8) to get 1-9/32 inch clearance A between pressure plate face (3) and pressure cover flange (4). GO TO FRAME 5 4-522