TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 538 of 968
TM 9-2815-210-34-2-2 c. Repair. NOTE Repair is limited to adjustment only. For en- gines LD-465-1, LD-465-1C, and LDT-465-1C, go to frame 1. For engines LDS-465-1 and LDS-465-1A, go to frame 4. For engine LDS-465-2 go to frame 6. FRAME 1 1. Place 0.3749 to 0.3751 inch thick by 13.000 inches dimeter spacer plate (1) into flywheel assembly (2) used for bench testing. 2. Place pressure plate (3) in place and screw in and tighten eight capscrews (4). 3. Using prybar, push in on each clutch finger (5) and take out clutch release lever spacer blocks (6). GO TO FRAME 2 4-519