TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 536 of 968
TM 9-2815-210-34-2-2 FRAME 4 1. Using 0.010-inch feeler gage (1) and straight edge (2), check that pressure plate (3) is not warped more than 0.010 inch. 2. Check that grooves in pressure plate (3) are not deeper than 0.010 inch. 3. Check that clutch pressure plate (3) has no overheating, rubbing against other metal parts or broken springs. 4. Check that there are no open cracks and heavy heat discoloration on pressure plate (3). 5. Check that there are no closely grouped hairline cracks which go to inner or outer edge of pressure plate (3). 6. If pressure plate (3) is damaged or worn, throw away pressure plate and get a new one. END OF TASK 4-517