Covering the politics, Business and technology of defense - Subscribe Today
TM-9-2815-210-34-2-2 Page 535

TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2

Page 535 of 968


Download
FRAME 3 1. 2. 3. 4. 5. NOTE This task is shown for engine LD-465-1. This task is the same for all engines. Stand a new transmission input shaft (1) on gear end on surface plate. Put clutch disk (2) on splined end of input shaft (1) with long end of drive hub toward surface plate. Set up dial indicator (3) as shown. Take measurements at various places around clutch disk (2). Measurements should be made near center, inside, and outside diameters of disk facing. Difference between readings in step 4 should not be more than 0.010 inch. Throw away clutch disk (2) if readings are different by more than given limit. GO TO FRAME 4 4-516 TM 9-2815-210-34-2-2