TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 467 of 968
TM 9-2815-210-34-2-2 (2) Cleaning. There are no special cleaning procedures needed. Refer to cleaning procedures given in para 4-3. (3) Inspection and repair. NOTE For engines LD-465-1, LD-465-1C, LDT-465-1C, LDS-465-1, and LDS-465-1A, go to frame 1. For engine LDS-465-2, go to frame 2. FRAME 1 WARNING 1. 2. 3. 4. 5. 6. 7. Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when sol- vent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Check that pulley flange (1) and pulley half (2) has no cracks, nicks, wear and other damage. Fix minor damage to belt surfaces of pulley flange and pulley half with fine mill file or crocus cloth dipped in dry cleaning solvent. Check that clamping sections (3) of pulley flange (1) have no breaks and bends. Check that threaded holes in clamping section (3) are not damaged. Fix damaged threads with a tap. Check that two screws (4) have no damaged threads. Fix minor thread damage with a file thread restorer. Check that threads on pulley half (2) are not damaged. Fix damaged threads with a file thread restorer. Check that keyway inside pulley half (2) has no damage or wear. If pulley flange (1) or pulley half (2) are damaged beyond repair, throw them away and get new ones. END OF TASK 4-448