TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 448 of 968
TM 9-2815-210-34-2-2 4-45. EXHAUST MANIFOLD ASSEMBLY. a. Disassembly. FRAME 1 WARNING 1. 2. 3. 4. 5. 6. Wear welder’s gloves when handling hot parts. Failure to do so will result in serious burns. CAUTION Do not use cutting tip on welding torch or exhaust manifold assembly may be damaged. Put center exhaust manifold section (1) in vise. Using welding torch, heat front exhaust manifold section (2) near joint (3). Pull front exhaust manifold section (2) from center exhaust manifold section (1) Take three seal rings (4) out Throw away seal rings. Do steps 2, 3, and 4 for rear Take center exhaust manifold of groove in front exhaust manifold section (2). exhaust manifold section section (1) out of vise. (5). END OF TASK 4-429