TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 444 of 968
TM 9-2815-210-34-2-2 b. There are no special cleaning procedures needed. Refer to cleaning procedures given in para 4-3. c. Inspection and Repair. FRAME 1 1. 2. 3. 4. Check that three expansion plugs (1) are not loose, leaking or damaged in any other way. If any expansion plug is damaged, get a new one. Check that four studs (2) are not loose, stripped, crossthreaded or damaged in any other way. Fix minor thread damage with a thread chaser. If more repair is needed, get a new part. NOTE To check for cracks, refer to para 4-4. Check that intake manifold (3) is not cracked, bent or damaged in any other way. If repair is needed, get a new part. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when sol- vent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Check that gasket surfaces (4) have no nicks, burrs or scratches. Take out minor nicks, burrs or scratches with a fine mill file or crocus cloth dipped in dry cleaning solvent. If more repair is needed, get a new intake manifold (3). GO TO FRAME 2 4-425