TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 430 of 968
TM 9-2815-210-34-2-2 e. Assembly. (1) Adjusting screw type nozzle and holder assembly. NOTE Work area must be kept clean. FRAME 1 CAUTION Do not touch valve (1) with hands. Oil may rub off causing a sticking valve which can damage equipment. Do not let polished surface of valve or nozzle body (2) touch any hard surfaces. Nicks or scratches can dam- age equipment. 1. Hold valve (1) with pliers, as shown, and push into valve body (2). 2. Put valve (1) with valve body (2) into nozzle holder (3). Put nozzle holder into soft-jawed vise, as shown. 3. Put on and tights nozzle capnut (4) to 40 to 45 pound-feet. GO TO FRAME 2 4-411