TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 406 of 968
TM 9-2815-210-34-2-2 4-38. FUEL INJECTOR FUEL RETURN TUBES. a. Cleaning. FRAME 1 1. 2. Clean plastic fuel tubes (1) with soap and water. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Eye shields must be worn when using compressed air. Eye injury can occur if eye shields are not used. Clean clamps (2), connecting tees (3), and elbows (4) with dry cleaning sol- vent and blow dry with compressed air. END OF TASK 4-387