TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 401 of 968
TM 9-2815-210-34-2-2 b. All Engines Except LDS-465-2. (1) Cleaning. FRAME 1 WARNING 1. 2. 3. GO Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. CAUTION Do not let dry cleaning solvent touch six rubber boots (1). Boots will dry out and crack. If dry cleaning solvent splashes on with clean cloth. Slide six rubber boots (1) to one end outside of six fuel injector tubes with cloth. rubber boots, dry of six fuel injector tubes (2). Clean dry cleaning solvent. Dry with clean Slide six rubber boots (1) to center of six fuel injector tubes (2). Clean ends of six fuel injector tubes which were covered by rubber boots in step 1. WARNING Eye shields must be worn when using compressed air. Eye injury can occur if eye shields are not used. Flush inside of six fuel injector tubes (2) with dry cleaning solvent. Blow dry with compressed air. Plug ends of six fuel injector tubes to keep out dirt. TO FRAME 2 4-382