TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 37 of 968
TM 9-2815-210-34-2-2 FRAME 2 NOTE Readings must be within limits given in table 4-1. If readings are not within given limits, throw away part and get a new one. 1. 2. 3. Check that oil pump idler gear shaft (1) is not cracked or broken. Check that oil pump idler gear shaft is not scored. Check that oil pump idler gear shaft does not have small bits of metal stuck in it. Measure out side diameter of oil pump idler gear shaft (1). If oil pump idler gear shaft (1) is damaged or worn, using 2-ton hydraulic press, press it out of front main bearing cap (2). IF OIL PUMP IDLER GEAR SHAFT (1) WAS PRESSED OUT, GO TO FRAME 3. IF OIL PUMP IDLER GEAR SHAFT (1) WAS NOT PRESSED OUT, GO TO FRAME 5 Table 4-1. Oil Pump Idler Gear Shaft Wear Limits Index Number Item/Point of Measurement 1 Oil pump idler gear shaft Size and Fit of New Parts Wear Limits (inches) (inches) 0.7869 to 0.7873 0.7867 4-18