TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 272 of 968
TM 9-2815-210-34-2-2 FRAME 2 1. 2. 3. 4. 5. Put spring retainer (1) over outer valve spring (2) as shown. Using valve spring compressor, squeeze spring retainer against springs so that groove (3) in valve stem (4) sticks through hole in spring retainer. Put two spring retainer locks (5) over groove (3) in valve stem (4) and hold retainer locks together. While holding retainer locks (5) together, slowly work valve spring compressor to let all tension off valve springs (2). CAUTION Be sure spring pressure is holding retainer locks (5) in place in groove on valve stem before letting go of retainer locks. If retainer locks are not locked to valve stem, assembly may fly apart when retainer locks are let go and parts will be lost. Let go of retainer locks (5). Take off valve spring compressor. Do frames 1 and 2 again for other two exhaust valves and for three intake valves. END OF TASK 4-253