TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 260 of 968
TM 9-2815-210-34-2-2 FRAME 3 1. Using NOTE Readings must be within limits given in table 4-50. If readings are not within given limits, throw part away and get a new one. Intake valves (1) are bigger than exhaust valves (2). depth micrometer, measure length of three intake valves (1) from tip to gage line as shown. 2. Using depth micrometer, measure length of three exhaust valves (2) from tip to gage line as shown. GO TO FRAME 4 Index Number 1 2 Table 4-50. Intake and Exhaust Valve Length Wear Limits Item /Point of Measurement Intake valve length from tip to gage line Exhaust valve length from tip to gage line Size and Fit of New Parts (inches) 6.0820 to 6.0880 6.0700 to 6.0760 Wear Limit (inches) 6.0980 6.0860 4-241