TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 25 of 968
TM 9-2815-210-34-2-2 FRAME 3 1. 2. 3. END NOTE There is an expansion plug (1) behind identification plate (2). Identification plate should not be taken off unless there are signs of coolant leakage under it. Coolant leakage around expansion plug (1) will show up as rust, scale or stain on side of crankcase (3) below expansion plug. Check that there is no sign of leakage below identification plate (2). If there are signs of leakage below identification plate (2), take it off using hammer and cold chisel. If identification plate (2) was taken off, mark expansion plug (1) for removal. OF TASK 4-6