TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 235 of 968
TM 9-2815-210-34-2-2 FRAME 6 1. Lay straight edge (1) along line A on gasket surface of cylinder head (2). Using 0.005inch feeler gage, check that gasket surface of cylinder head (2) is not more than 0.005 inch out-of-flat lengthwise. If gasket surface is more than 0.005 inch out-of-flat lengthwise, get a new cylinder head. 2. Lay straight edge (1) along line B on gasket surface of cylinder head (2). Do step 1 again. 3. Lay straight edge (1) along line C on gasket surface of cylinder head (2). Do step 1 again. GO TO FRAME 7 4-216