TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 225 of 968
TM 9-2815-210-34-2-2 d. Assembly. FRAME 1 CAUTION Upper spring (1) is longer than lower spring (2) on both models of regulator (3). Be careful not to mix them up or regulator will not work properly. NOTE Two types of oil pressure regulator (3) have been used on these engines. Assembly procedure is the same for both except as noted. Upper plug (4) and lower plug (5) are the same size on early model regulator (3). 1. Put in two plungers (6), upper spring (1), lower spring (2), two gaskets (7), upper plug (4), and lower plug (5). 2. On early model regulators (3), put in pipe plug (8). 3. On late model regulators (3), put in pipe plug (9). END OF TASK NOTE: CHECK ONLY THOSE PARTS WHICH ARE CALLED OUT IN THIS FRAME. PARTS WITHOUT CALLOUTS ARE SHOWN ONLY FOR REFERENCE PuRPOSES OR ARE CHECKED IN ANOTHER FRAME. 4-206