TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 200 of 968
TM 9-2815-210-34-2-2 FRAME 18 NOTE Readings must be within limits given in table 4-38. The letter L shows a loose fit. If readings are not within given limits, get a new oil pump. 1. Measure inside diameter of impeller drive shaft bushing (1). 2. Measure outside diameter of impeller drive shaft. 3. Measure fit of impeller drive shaft diameter (2) in impeller drive shaft bushing (1). 4. Measure inside diameter of impeller drive shaft bushing (3). 5. Measure outside diameter (4) at other end of impeller drive shaft. 6. Measure fit of impeller drive shaft diameter (4) in impeller drive shaft bushing (3). GO TO FRAME 19 NOTE: CHECK ONLY THOSE PARTS WHICH ARE CALLED OUT IN THIS FRAME. PARTS WITHOUT CALLOUTS ARE SHOWN ONLY FOR REFERENCE PURPOSES OR ARE CHECKED IN ANOTHER FRAME. 4-181