TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 176 of 968
TM 9-2815-210-34-2-2 (b) Engines LDS-465-1, LDS-465-1A, and LDS-465-2 FRAME 1 1. 2. 3. 4. CAUTION Be careful not to damage screens (1) during cleaning with brass wire probe. Clean four oil pump tubes (2) with a brass wire probe. Use a wire brush to take out carbon and sludge. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Wash four oil pump tubes (2) by flushing with dry cleaning solvent. WARNING Eye shields must be worn when using compressed air. Eye injury can occur if eye shields are not used. Dry four oil pump tubes (2) by blowing them out with compressed sir. Clean brace (3), flange (4), and four clamps (5) using dry cleaning solvent. Use a stiff brush to take off sludge and gum deposits. END OF TASK 4-157