TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 175 of 968
TM 9-2815-210-34-2-2 (1) Oil pump tubes. (a) Engines LD-465-1, LD-465-lC, and LDT-465-lC. FRAME1 CAUTION Be careful not to damage screens (1) diring cleaning with brass wire probe. 1. Clean three oil pump tubes (2) take off carbon and sludge. Dry cleaning solvent is with a brass wire probe. Use a wire brush to WARNING flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. 2. Wash three oil pump tubes (2) by flushing with dry cleaning solvent. WARNING Eye shields must be worn when using compressed air. Eye injury can occur if eye shields are not used. 3. Dry three oil pump tubes (2) by blowing them out with compressed air. 4. Clean bracket (3) and flange (4) with dry cleaning solvent. Use a stiff brush to take off sludge and gum deposits. END OF TASK 4-156 b. Cleaning.