TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 145 of 968
TM 9-2815-210-34-2-2 h. Replacement of Expansions Plugs, Pipe Plugs, and Crankcase to Cylinder Head Studs. FRAME 1 1. If expansion plug (1) behind identification plate (2) was taken out, coat new expansion plug with sealer. Then knock in new expansion plug using mallet and short brass rod until they are about 1/8-inch below surface of crankcase (3). 2. Line up four holes in identification plate (2) with mounting holes for identification plate in crankcase (3). Using hammer, tap in four straight pins (4). 3. Put in crankcase to cylinder head studs (5). GO TO FRAME 2 4-126