TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 131 of 968
TM 9-2815-210-34-2-2 FRAME 9 1. 2. 3. 4. NOTE Readings must be within limits given in table 4-23. If readings are more than given limits, take out all four camshaft bearings (1 to 4) using camshaft bushing remover and replacer kit. Then go to frame 10. Measure inside diameter of camshaft rear bearing (1). Note measurement. Measure inside diameter of camshaft rear intermediate camshaft bearing (2). Note measurement. Measure inside diameter of camshaft front intermediate camshaft bearing (3). Note measurement. Measure inside diameter of camshaft front bearing (4). Note measurement. GO TO FRAME 13 Index Number 1 2 3 4 Table 4-23. Camshaft Bearing Wear Limits Item/Point of Measurement Camshaft rear diameter Camshaft rear bearing inside bearing inside intermediate diameter Camshaft front intermediate bearing inside diameter Camshaft front bearing inside diameter Size and Fit of New Parts (inches) 1.9940 to 1.9950 2.3065 to 2.3075 2.3690 to 2.3700 2.4315 to 2.4325 Wear Limit (inches) 1.9970 2.3095 2.3720 2.4345 4-112