TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 114 of 968
TM 9-2815-210-34-2-2 FRAME 70 1. 2. 3. 4. If any measurement taken in frame 69 is not within limits given in table 4-17, skip step 2 and do step 3. Count the number of main bearing oil clearance measurements done in step 2 of frame 69 that are more than 0.0062 inch. If four or more oil clearance measurements are more than 0.0062 inch, do step 3. If three or fewer oil clearance measurements are more than 0.0062 inch, go to frame 75. Take out two screws and washers (1) from each of seven main bearing caps (2), Take off seven main bearing caps (2). Take out and throw away all 14 main bearing halves (3) and get a new standard size main bearing kit. NOTE If main bearing halves (3) were changed, do frames 56 to 70 again for new main bearing halves. GO TO FRAME 75 4-95