TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 110 of 968
TM 9-2815-210-34-2-2 FRAME 67 NOTE Main bearing caps (1) with bearing halves (2) and main bearing saddles (3) are called by numbers one to seven counting from front to rear of crankcase (4). Number seven main bearing cap has a slot (5) on each side for rubber oil seal. 1. Put number seven main bearing cap (1) with bearing half (2) on number seven main bearing saddle (3). Mounting holes in number seven main bearing cap must line up with screw holes in number seven bearing saddle. 2. Coat two bolts (6) and washers (7) lightly with engine lubricating oil. Put in and hand tighten two bolts and washers. 3. Using torque wrench, tighten two bolts (6) to 80 to 90 pound-feet. 4. Using torque wrench, tighten two bolts (6) to 115 to 120 pound-feet. GO TO FRAME 68 4-91