TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 108 of 968
TM 9-2815-210-34-2-2 FRAME 65 1. 2. 3. 4. NOTE Main bearing caps (1) with bearing halves (2) and main bearing saddles (3) are called by numbers one to seven counting from front to rear of crankcase (4). Number four main bearing cap (1) is called main thrust bearing cap. It is wider than other main bering caps. Number four main bearing saddle (3) is called main thrust bearing saddle. It is wider than other main bearing saddles. Put main thrust bearing cap (1) with bearing half (2) on main thrust bearing saddle (3). Mounting holes in main thrust bearing cap must line up with mounting holes in main thrust bearing saddle. Coat two bolts (5) and washers (6) lightly with engine lubricating oil. Put in and hand tighten two bolts and washers. Using torque wrench, tighten two bolts (5) to 80 to 90 pound-feet. Using torque wrench, tighten two bolts (5) to 115 to 120 pound-feet. GO TO FRAME 66 4-89