TM-9-2815-210-34-2-1 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 1
Page 87 of 259
TM 9-2815-210-34-2-1 FRAME 4 1. 2. 3. 4. 5. NOTE Fuel injection pump (1) shown is for engines LD-465-1, LD-465-1C, and LDT-465-1C. This task is the same for other engines. Have machine shop make holding wrench (2). See figure 3-1. Join holding wrench (2) to fuel injection pump drive gear hub (3) using two screws (4) as shown. Take off nut (5). Take out two screws (4) and take off holding wrench (2). Pull off drive gear hub (3). Put nut (5) back on fuel pump driveshaft (6). END OF TASK 3-39