TM-9-2815-210-34-2-1 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 1
Page 86 of 259
TM 9-2815-210-34-2-1 FRAME 3 Soldier A 1. Hold up fuel pump assembly (1) so it does not fall when mounting screws are taken out. Soldier B 2. If fuel pump (1) is held with screw (2) as in view A, unscrew but do not take out screw. 3. If fuel pump is held with nut and lockwasher (3) on stud (4) as in view B, take off nut and lockwasher (3). 4. Take out two screws and lockwashers (5). Soldier A 5. Pull fuel pump assembly (1) toward back of engine and take it out. If engine has mounting stud (4) , make sure that pump assembly clears it. 6. Put container under front end of fuel pump assembly ( 1). Tilt fuel pump forward and drain oil inside fuel pump into can. NOTE Preformed packing (6) may stick to fuel injection pump assembly (1). 7. Take off and throw away preformed packing (6). GO TO FRAME 4 3-38