TM-9-2815-210-34-2-1 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 1
Page 34 of 259
TM 9-2815-210-34-2-1 2-3. REMOVAL OF ENGINE FROM SHIPPING AND STORAGE CONTAINER. NOTE This task is the same for all engines. Engine LDS-465-1A is shown. FRAME 1 1. Unscrew and take out pneumatic tank valve cap (1). 2. If valve cap (1) has slot, use slotted end of valve cap to unscrew and take out valve core (2) to vent shipping and storage container (3). If valve cap does not have slot, use valve stem repair tool to unscrew and take out valve core to vent shipping and storage cent airier. 3. Using slotted end of valve cap (1) or valve stem repair tool, screw valve core (2) back into pneumatic tank valve (4) and tighten. Screw valve cap back on finger tight. GO TO FRAME 2 2-2