TM-9-2815-210-34-2-1 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 1
Page 220 of 259
TM 9-2815-210-34-2-1 3-42. PISTON AND CONNECTING ROD ASSEMBLIES. CAUTION It is easy to damage the equipment if you do not know what you are doing. Do not try to do this task unless you are experienced at it, or you have an experienced person with you. FRAME 1 1. 2. 3. Turn engine overhaul stand so that crankshaft damper and pulley (1) are facing up. Using engine barring tool, turn crankshaft damper and pulley (1) until cylinder number one piston and connecting rod assembly (2) and cylinder number six piston and connecting rod assembly (3) are at bottom of stroke. NOTE Cylinder sleeves (4, 5, and 6) and piston and con- necting rod assemblies (2, 3, and 7) are called by numbers one to six counting from front to rear of engine (8). Using cylinder ridge reamer, ream out ridge at top of number one cylinder sleeve (4) and number six cylinder sleeve (5). GO TO FRAME 2 3-172