TM-9-2815-210-34-2-1 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 1
Page 199 of 259
TM 9-2815-210-34-2-1 NOTE Tell machine shop to make pilot stud (1). See figure 3-3. 1. Put pilot stud (1) through hole in flywheel (2) and flexible transmission plates (3) and tighten as shown. 2. Make a scribe mark (4) on transmission drive ring (5) next to pilot stud (1) as shown. Make a second pair of scribe marks (6) near edge of outer flexible drive plate (3) and on inner lip of flywheel (2) opposite pilot bolt (1) as shown. GO TO FRAME 3 TA 087695 3-151