TM-9-2815-210-34-2-1 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 1
Page 186 of 259
TM 9-2815-210-34-2-1 FRAME 2 1. Join lifting sling (1) to front cylinder head assembly (2) using screw and flat washer ( 3) and nut and flat washer (4) as shown. CAUTION Soldier A Soldier B Soldiers A and B Make sure chain hoist (5) is in position directly above cylinder head assembly (2) to be taken out. Cylinder head assembly must be lifted straight up or mounting studs at top of engine (6) may be bent. 2. Hook chain hoist (5) to lifting sling (1). Guide cylinder head (2) straight up while soldier B lifts it. 3. Work chain hoist (5) to lift front cylinder head assembly (2) off engine (6). Set front cylinder head assembly down on workbench. 4. Do steps 1, 2, and 3 again for rear cylinder head assembly (7). GO TO FRAME 3 3-138