TM-9-2815-210-34-2-1 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 1
Page 133 of 259
TM 9-2815-210-34-2-1 FRAME 2 1. If working on flame heater type A or B, take out four nts and lockwashers (1). Take off flame heater harness clamp (2) and flame heater assembly (3). Take off and throw away flame heater-to-intake manifold gasket (4). NOTE On some engines, ignition coil (5) may be mounted on top of engine instead of next to flame heater assembly as shown. If ignition coil (5) is not mounted as shown, do not do step 2. 2. Unscrew nut (6) and take out wiring harness (7). IF WORKING ON FLAME HEATER TYPE C, GO TO FRAME 3. IF WORKING ON FLAME HEATER TYPE A OR B, GO TO FRAME 4 3-85