TM 9-2520-246-34 Table 2-1. Special Tools Item Reference No. Item NSN Fig. Para Use 1 BRACKET, angle (used with 5240-00-610-0920 4-4 4-5 Used to adapt right side of stand 4910-00-529-8387) transfer case to stand. (7010363) 2 BRACKET, angle (used with 5340-00-610-0919 4-4 4-5 Used to adapt left side of transfer stand 4910-00-529-8387) case to stand. (7010362) 3 ADAPTER, mechanical puller 5120-00-708-3254 3-29 3-8 Used to remove transmission (used with puller 5120-00-313- reverse idler gear shaft. 9496) (7083254) 4 PULLER KIT, mechanical 5120-00-338-6721 3-21 3-8 Used to remove companion flange companion flange) (8708724) 4-5 4-5 from transmission, transfer, and 4-22 4-30 and carrier. 5 HANDLE, used with remover 5120-00-708-3241 4-18 4-6 Used to remove or replace transfer and replacer 5120-00-708-3247 4-42 4-23 idle shaft front bearing cup. (7083241) 6 REMOVER AND REPLACER 5120-00-708-3247 4-18 4-6 Used to remove or replace transfer (used with handle 5120-00-708- 4-42 4-23 idle shaft front bearing cup. 3241) (7083247) No. 2-2.01 2-2.02 2-2.03 2-2.04 2-2.05 Table 2-2. Troubleshooting Table Index Title Transmission Models 30-52 and 3053A Transfer Model T-136-27 Transfer Model T-136-21 Power Takeoff Models WND-7-28 and WN-7-28 Power Takeoff Model P-136-C Page 2-3 2-7 2-11 2-12 2-14 2-2