TM 9-2520-246-34-1 FRAME 2 1. Measure 2. Measure NOTE Readings must be within limits given in table 2-14. The letter L indicates a loose given limits, throw away fit of two bearings (1) on fit of two bearings (1) in fit. If readings are not within part and get a new one. shaft (2). gear bore (3). END OF TASK Table 2-14. Reverse Idler Gear Assembly Fits and Tolerances Index Number 1 and 2 1 and 3 2-60 Item/Point of Measurement Fit of bearing on shaft Fit of bearing in gear bore Size and Fit of New Parts (inches) 0.005L to 0.0015L 0.0005L to 0.0015L Wear Limit (inches) None 0.010