TM 9-2520-246-34-1 2-39. SHIFT TEST. This transfer power takeoff for paragraph gives instructions for testing the transmission positive shifting. FRAME 1 1. 2. 3. 4. NOTE Turn output shaft (1) after shifting in each position to make sure it turns freely. Push shift lever (2) forward. Clutch sleeve (3) should move forward. Pull shift lever (2) back until you feel it go into the first detent. Clutch sleeve (3) should move back. Pull shift lever (2) all the way back. Clutch sleeve (3) should move all the way back. If transmission transfer assembly (4) does not shift into all three positions or does not turn freely, do the following: (a) Disassemble transmission transfer power takeoff. Refer to para 2-33, frames 1 through 5. (b) Check that all parts move freely and that there are no damaged parts. Refer to para 2-35, frame 2. (c) Assemble transmission transfer power takeoff. Refer to para 2-38, frames 10 through 13. END OF TASK 2-377/(2-378 blank)