TM 9-2520-246-34-1 FRAME 10 1. Put fork (1) inside carrier (2). 2. Aline splines in sliding clutch (3) with splines on output shaft (4) and put sliding clutch on output shaft and inside carrier (2). Slide fork (1) on sliding clutch. 3. Put preformed packing (5) on shifter shaft (6). Put shifter shaft in carrier (2) and through hole in fork (1). 4. Working through drain plug hole (7), aline setscrew hole in fork (1) with setscrew hole in shifter shaft (6). Put in setscrew (8). GO TO FRAME 11 2-373