TM 9-2520-246-34-1 FRAME 2 NOTE Small chips, burrs or scratches on shafts, gears, sliding clutch, and shifter fork can be repaired. If parts are damaged in any other way, throw parts away and get new ones. 1. Check that shaft (1) is not chipped or cracked. 2. Check that shaft splines (2) are not chipped, cracked, twisted or burred. 3. Check that sliding clutch (3) is not chipped or cracked and that internal splines are not twisted or burred. 4. Check that shifter fork (4) and shifter shaft (5) are not cracked or bent. 5. Check that all threaded parts are not stripped or crossthreaded. 6. Check that shifting lever lock ball (6) has no flat spots. 7. Check that shifting lever lock spring (7) is not damaged. GO TO FRAME 3 2-360