TM 9-2520-246-34-1 Section V. MAINTENANCE OF TRANSMISSION TRANSFER POWER TAKEOFF TOOLS : Power train rebuild tool kit, pn 7950356 SUPPLIES : Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 White lead pigment, NSN 8010-00-290-6643 Universal gear lubricant, GO 80/90, MIL-L-2105 Lubricating oil, ICE, OE/HDO 10, MIL-L-2104 Safety wire, MS20995F47 Oil pump mounting gasket Rear bearing retainer gasket End play shim set Rear bearing retainer oil seal Shifter shaft preformed packing Compressed air source, 30 psi max PERSONNEL: TwO EQUIPMENT CONDITION : Transmission transfer power takeoff on workbench. 2-32. CLEANING BEFORE DISASSEMBLY. This paragraph gives instructions for cleaning the transmission transfer power takeoff before disassembly. Note and scribe transmission transfer power takeoff case in places that have oil soaked road mud. It is not necessary to mark oil spots around gaskets or seals since new gaskets and seals will be put in. Scrape, brush, and steam clean all dirt and road mud from the transmission transfer power takeoff assembly. 2-346