TM 9-2520-246-34-1 c. Output Shaft Assembly. FRAME 1 1. Measure 2. Measure 3. Measure 4. Measure 5. Measure NOTE Readings must be within limits given in table 2-62. If readings are not within given limits, throw away part and get a new one. two bearing inside diameters (1) and outside diameters (2). inside diameter of helical gear (3). output shaft outside diameter (4). output shaft outside diameter (5). output shaft outside diameter (6). GO TO FRAME 2 Index Number 1 2 3 4 5 6 Table 2-62. Output Shaft Assembly Wear Limits Item/Point of Measurement Bearing inside diameter Bearing outside diameter Helical gear inside diameter Shaft outside diameter Shaft outside diameter Shaft outside diameter Size and Fit of New Parts (inches) 1.3780 2.8346 1.4060 to 1.4065 1.3785 to 1.3795 1.3985 to 1.4000 1.3785 to 1.3795 Wear Limit (inches) None None None None 0.003 None 2-317