TM 9-2520-246-34-1 FRAME 2 1. Measure fit 2. Measure fit END OF TASK NOTE Readings must be within limits given in table 2-59. The letter L indicates a loose fit. If readings are not within given limits, throw away part and get a new one. of two bearings (1) on reverse gear shaft (2). of reverse gear (3) on reverse gear shaft (2). Table 2-59. Reverse Gear Shaft Assembly Fits and Tolerances Index Number 1 and 2 2 and 3 Item/Point of Measurement Fit of bearings on shaft Fit of reverse gear on shaft Size and Fit of New Parts (inches) 0.0005L to 0.0025L 0.0015L to 0.0035L Wear Limit (inches) 0.004 0.0055L 2-314